The remote-controlled track weeding machine is suitable for various soil types: hard soil, clay, black soil, mountainous areas, and soft soil. It can be used with confidence.
Standard technical parameters for remote-controlled track weeding machine: Ditch width 11-40cm (adjustable) Ditch depth 5-40cm (adjustable) Soil height 45cm (adjustable) Crop spacing 50-110cm (adjustable).
Technical parameters for ridge operation: Ridge height 10-45cm (adjustable) Ridge width 30-70cm (adjustable).
Precautions
1. Operators must be proficient in the use and operation of rotary tillers to avoid injury caused by improper operation.
2. Check all components of the rotary tiller to ensure that it is in normal condition.
3. Safety must be taken into account during operation to prevent serious injury caused by the rotary tiller turning over or getting caught up in the cutting tools.
After the rotary tillage operation is completed, the rotary tiller must be thoroughly cleaned and maintained to extend its service life.
In short, the remote-controlled tracked weeding machine is an efficient tillage equipment, but safety and maintenance should be taken into account during use to ensure the normal operation and service life of the rotary tiller.
Startup Steps
1. Turn on the fuel switch;
2. The switch opens vertically downwards;
3: Open the diesel cap, add diesel, and ensure that the diesel does not protrude above the filter screen;
4: Pull the throttle lever and increase the throttle to three-quarters of the way;
5: Press and hold the pressure reducing valve with your hand, do not release it;
6: Pull the handle back and forth, hear the sound of the oil pipe, stop pulling;
7: At this point, release the pressure reducing valve and slowly pull the rope by hand until it can no longer be pulled;
8: Press the pressure reducing valve again and release it by hand;
9: Grasp the starter handle and exert force to go out about one meter to start the machine.
Hot Tags: remote-controlled track weeding machine, China remote-controlled track weeding machine manufacturers, factory, Hand Push Snow Blower, Small Tracked Trencher, Crawler Fertilizer Planter, Highway Ash Spreader, Wheeled Skid Steer Loader, Spiral Snow Removal Machine
