China Tracked Carrier Manufacturers Factory - Discount Tracked Carrier in Stock

What is Tracked Carrier

Tracked Carriers offer exceptional versatility in sand mining applications, where they enable ongoing production during excessive rainfall and when high water tables minimize drainage and can also be used for tailing pond management when required or carrying attachments like personnel carriers and drills, etc.

Benefits ofTracked Carrier

Cost Savings
When you consider versatility tracked carrier provide, it is not surprising that crawler carriers are a serious investment. That said, they offer significant cost savings over other solutions. Due to their numerous available attachments, one crawler carrier can perform many tasks that would have traditionally required multiple machines. As an example, the same unit can change from a flatbed, to a welding tractor, to a dump bed. This means the possibilities for your piece of equipment are endless and you are not required to purchase separate machines for each.
Crawler carriers are incredibly flexible; their low ground pressure means they can be used on soft surfaces such as mud and sand without causing any damage, making them ideal for multiple applications, including transportation, drilling, and hauling.

Safety
Crawler carriers are designed to reduce risks on construction sites by providing operators with an extra layer of protection against potential hazards. They also offer superior stability compared to wheeled machines meaning operators are less likely to lose control when navigating uneven terrain or steep inclines. This ultimately leads to improved safety conditions on site and lower insurance premiums for businesses overall.
As you can see, there are many advantages to using crawler carriers in construction projects. Their cost savings potential, flexibility and safety features, make them an attractive option for businesses seeking reliable solutions. All-in-all, investing in crawler carriers is a smart choice that will pay dividends both now and in the future!

High-quality Crawler Transporter
Model:0.8 Ton-10 TonEngine:8.5hp-100hpCarriage size:1200-2400*750-1800*450-600mmChassis width:600-1600mm
read more
All-terrain Crawler Transporter
‌Load-bearing:0.8 Ton-10 TonEngine:8.5hp-100hpCarriage size:1200-2400*750-1800*450-600mmChassis width:600-1600mmAuxiliary tools:Wood clamp, excavator
read more
Agricultural Crawler Transporter
Agricultural crawler transport vehicles are flexible and rely on the supporting wheel system and crawler tracks to support the weight of the entire vehicle. The center of gravity is stable, the turning radius is small, and it is especially
read more
Versatile Crawler Transporter
The multifunctional crawler transporter is a special mining vehicle that uses a crawler travel system, mainly used for heavy-load transportation and complex terrain operations. Its concept can be traced back to the early 20th century. With
read more
Engineering Crawler Transport Vehicle
Engineering crawler transport vehicle have some advantages over traditional tire transporters. First, tracked transporters can adapt to various terrains, including mud, desert, and snow. Tracked transporters are often used in the military,
read more
Multi-purpose Crawler Transporter
Multi-purpose crawler transporters can be used in the construction and agricultural felds. Multi-purpose crawler transporters are suitable for a wide range of terrains and are more adaptable to muddy potholes. Multi-purpose crawler
read more
China New Product Crawler Dumper
The crawler dump truck is a kind of engineering machinery specially designed for earthmoving projects and heavy material transportation. It has a crawler walking system and can drive stably on complex terrain. Its self-unloading function
read more
New Type Crawler Dumper
Advantages of crawler dump trucks:1. Superior traction: The crawler design provides good grip and is suitable for driving in muddy or rugged terrain.2. Strong stability: When driving on uneven ground, crawler dump trucks are more stable
read more
Agricultural Machinery Crawler Dump Truck Garden Transpor...
The crawler dump truck is a kind of engineering machinery specially designed for earthmoving projects and heavy material transportation. It has a crawler walking system and can drive stably on complex terrain. Its self-unloading function
read more
Multifunctional crawler dump truck
Multifunctional crawler dump trucks are a type of transport that can operate on a variety of complex terrains. Due to their unique structure and functions, they play an important role in many fields. Multifunctional crawler dump trucks are
read more
Crawler Dumper Truck Loader
Crawler Dumper Truck uses tracks as the walking system, replacing traditional wheels. The main characteristics include low pressure on ground units, low subsidence, strong adhesion ability, and strong driving and passing ability. Able
read more
Mini Crawler Dumper
The mini crawler dumper is a compact crawler transport tool primarily designed for efficient and flexible cargo transportation in narrow spaces and challenging terrains.The mini crawler dumper combines the stability of a crawler vehicle
read more

First 12 Last

Why Choose Us

Complete Product Range
Lime soil mixer, road cold recycling machine, grader, trencher, excavator, tracked transport vehicle, tracked trencher, rotary tiller, skid steer loader, roller, forklift, small excavator, loader, four-wheel tractor, drive rake, mixing tank, flipping plow, tree root powder crusher, lawn mower.

Quality Services
Our team is committed to delivering high-quality services to our clients. We use the latest technologies and tools to ensure that our services exceed your expectations.

Quality
We offer high quality services and products that are relatable and resonate with your business needs.

need something done?

Utility
Adding a digger derrick to the crawler chassis provides the ability to dig holes, lift and set poles, turn screw anchors and set transformers in the hardest-to-reach locations.
Tracked carrier can also accommodate boom-tip configurations, multiple-sized augers for different job site applications and outriggers for extra stabilization.

Mining & Drilling
The low ground pressure of tracked carriers is ideal for tailings pond management, travel on leach pads and exploration drilling on mining job sites due the units’ ability to conquer wet and unstable ground conditions. Tracked carrier can also be configured with a water tank and hydraulic crane unit to support mineral exploration applications, a spray boom for dust suppression on tailings ponds and a variety of technical drill rigs for soil sampling year-round.

Pipeline
To conquer the toughest pipeline jobs, tracked carrier can be outfitted with a variety of industry tools and equipment, including tac welders, pipe heating units and cranes. Crawler carriers improve the process of potholing on a pipeline when mounted with hydro vacuum excavation units. “the two-in-one machine provides our customers with safer, faster and more cost-efficient exposure to pipelines and positively impacts their bottom line.”

Personnel transport
Transporting workers to and from a job site can be challenging, but due to their ability to efficiently and safely maneuver over rough, soft and steep ground conditions along pipeline spreads, personnel crawler carriers make it a cinch.

Hauling
Flatbed crawler carriers lead the way on oil and gas pipeline job sites by hauling mats to be laid in preparation for heavier equipment to pass through, while dump-bed carriers that are fully-loaded haul the heaviest material and exert low pounds per square inch (psi) levels. The bed versatility allows these units to transport various types of materials, including dirt, mud, rocks, crib blocks, pipe and sand bags.
“And with the ability to maneuver in all types of terrain, crawler carriers can easily haul material on asphalt roads without damaging the surface.”

Environmental
In addition to minimized footprint and soil disturbance, crawler carriers can be equipped with specialized restoration equipment, such as hydroseeding units, broadcast seeders, bark blowers and straw blowers.
The hydroseeding unit allows users to seed, fertilize and mulch in one simple process. Crawler carriers with water tanks are also used to supply the hydroseeding crew with a steady supply of water to
Increase production.

Tight Quarters
Due to a lack of maneuverability while offloading materials using standard straight frame technology, tighter spaces create limited productivity.
To enable the tracked carrier to haul and dump materials at any angle, an innovative, rugged upper frame with a unique 360-degree functionality was developed. This rotational solution has dramatically saved time by eliminating the need for the driver to navigate the truck into a dumping position through a series of start and stop maneuvers. Instead, a simple touch of the switch rotates the bed into the desired position, delivering the material to the exact location without any adjustment of track positioning.

Classification Of Tracked Carrier By Engine

Semi-enclosed Three-wheeled Agricultural Crawler Transport Vehicle: The cab is semi-enclosed, and the semi-front wall in front of the driver is the main one. The design of this type of cab is mainly wind-proof, without a roof and no doors, 1~2 Seats, most of the transmission types are belts and combined rear axles, and most of the engines are single-cylinder diesel engines. This type of vehicle mainly considers the price factor.

Simple Shed Three-wheeled Agricultural Crawler Transporter: The cab is a simple shed without doors, with 1 to 2 seats, most of the transmission type is belt and combined rear axle, and the engine is mostly single-cylinder diesel. The price of this type of vehicle is higher than that of a semi-enclosed three-wheeled agricultural crawler truck.

Fully Enclosed Three-wheel Agricultural Crawler Transporter: The cab is fully enclosed, 2 doors, 1~2 seats. Compared with similar products, it is comfortable and beautiful. The transmission type is mainly belt and combined rear axle. Some Drive shaft transmission is adopted, and most of the engines are single-cylinder diesel engines, and some of them are multi-cylinder engines. The price is higher than the first two categories.

Long-head Four-wheel Agricultural Crawler Transporter: The cab is long-headed, with 2 doors or 4 doors, 2~5 seats, and the engine is a multi-cylinder engine. There are two types of cargo compartments, self-unloading and non-self-unloading, and transmission The type is shaft drive type.

Flat-head Four-wheel Agricultural Crawler Transport Vehicle: Flat-head Four-wheel Agricultural Crawler Transport Vehicle: the engine has a single-cylinder engine and a multi-cylinder engine, and the cargo compartment has two types of dump and non-dump. Transmission types include belts, combined rear axles and drive shafts.

Tracked Carrier Winter Maintenance

When the temperature is lower than 5℃, it is more difficult to start the engine. At this time, it is necessary to start the engine with some auxiliary mechanical technology. For example, it can heat water or steam to preheat the engine before starting, and the temperature can reach 30℃- Start again when the temperature is above 40°C (diesel engines are usually compression-ignition type, which requires preheating the cylinder temperature and heating the temperature of misty diesel).

When the water temperature of the diesel engine is higher than 55℃ and the oil temperature is higher than 45℃, the whole machine can enter the full-load working condition. When the tracked carrier is working normally, the water temperature and oil temperature of the engine should not exceed 95℃. The oil temperature should not exceed 110°C.

It is recommended that the engine should not exceed 15 seconds each time. If it cannot be started, the activation switch should be loosened, and the engine should be started after parking for 1 minute. After starting, it needs to be idling for a period of time before resuming and walking. Pay attention, the idling time should not be too long. Long (3-5 minutes), too long will easily form carbon deposits on the inner wall of the cylinder, showing the appearance of pulling the cylinder. If the tracked carrier is idling, one can charge the battery, and the other can make the water temperature reach 55℃ and the brake air pressure reach above 0.4Mpa.

When the temperature is lower than 0℃, after the tracked carrier strikes, discharge the cooling water in the water tank, engine, oil cooler and torque converter oil cooler to avoid freezing and cracking the body; the air storage tank should always be drained. , To avoid icing, causing brake failure.

When the temperature is lower than 0℃, check the antifreeze concentration in time, and stop using untreated water as engine coolant.

If the tracked carrier has not been used for more than half a month, it is necessary to start the engine once every 15 days and work for a period of time to charge the battery; if the strike time exceeds one month, please remove the battery and use a charger for charging , And to properly move the four-wheel drive agricultural four-dimension vehicle, change the pressure part of the tire to avoid tire deformation; the vehicle needs to be parked for more than two months, and it is necessary to disconnect or remove the negative battery of the battery.

Clutch Operation Process Of Tracked Carrier

The operation process of the clutch can be divided into the separation process and the engagement process. In the separation process, the clutch pedal is stepped on, and the free gap of the clutch is eliminated in the free stroke, and then the separation gap occurs in the working stroke, and the clutch is separated.

In the process of engagement, gradually loosen the clutch pedal, the pressure plate moves forward under the effect of the tension spring, firstly eliminate the separation gap, and effect sufficient pressure on the pressure plate, driven plate and flywheel operating surface; Afterwards, the separation bearing moves backward under the effect of the reset spring, a free gap occurs, and the clutch is engaged.

During the operation of the clutch, the driven disc will become thinner due to wear and tear, which will reduce the free gap, which will eventually affect the normal engagement of the clutch, so the clutch needs to be adjusted after a period of operation. The intention of the clutch adjustment is to ensure a suitable free gap, and the position and method of the clutch adjustment depends on the detailed crawler truck model.

The pressure plate is an automatic part of the clutch, which always rotates with the flywheel. Generally, it can be driven by a boss, key or pin to make it rotate together with the flywheel. At the same time, the pressure plate can move backward relative to the flywheel to separate the clutch. The driven disk is mainly composed of the driven disk body, the conflict sheet and the driven disk hub.

In the process of clutch separation to engagement, the conflicting disc, the flywheel and the pressure plate will conflict, and a lot of heat will be generated. These heat needs to be dissipated in time to prevent the conflicting plates from being damaged due to excessive temperature. Therefore, windows are provided on the clutch cover, and some are also equipped with air guide plates to enhance internal ventilation and heat dissipation.

The most common compression structures of conflict clutches are spiral tension springs and diaphragm tension springs. Diaphragm tension spring clutches have two construction methods: push type and pull type. The helical tension spring clutch is divided into a peripheral spring and a center tension spring according to the way the tension spring presses on the pressure plate.

The operation organization of the clutch is divided into mechanical operation organization and hydraulic operation organization. In order to reduce the required clutch pedal force without increasing the pedal stroke due to the excessive transmission ratio of the transmission equipment, the clutch pedal is adopted on the crawler truck. Power-assisted equipment. In addition, there is also a pneumatic clutch operation organization that uses the engine's air compressor as the primary operating power, and the driver's body is used as an auxiliary or backup operating power, which is mostly related to the pneumatic brake system of the crawler truck or other pneumatics. The equipment shares a set of compressed air source.

Our Certificate

3C certification, gold certification, CE certification

productcate-1-1

Company Profile

The company is located in Jining, Shandong, known as the hometown of Confucius and Mencius and the land of etiquette. It is a group enterprise that integrates scientific research and development, processing and manufacturing, and trade services. It includes multiple departments such as the technology center, domestic trade department, international trade department, production department, quality inspection department, logistics department, and after-sales department, working together as a team. After years of hard work and innovation, we have become a professional mechanical manufacturer that specializes in scale, complete sets, technology, and energy conservation.

Asked Questions

Q: What is a crawler carrier?

A: Tracked carriers are off-road vehicles equipped with rubber tracked technology. The rubber tracks offer high traction and low ground pressure—enabling carriers to travel on uneven, steep and wet terrains with ease while minimizing ground damage on environmentally sensitive job sites.

Q: How are tracked carriers used at landfills?

A: Tracked carriers are unique in that they can be used during every stage of the landfill’s service life, from initial cell construction to post-closure monitoring. Most frequently, carriers haul dirt for daily cover and haul trash when ground conditions are too muddy or slippery for wheeled vehicles. Additional post-closure tasks such as inspecting the cap, repairing erosion, filling low areas due to settlement and maintaining vegetation are easy to accomplish with a crawler carrier since their low ground pressure prevents disruption to the layered infrastructure.

Q: What makes a crawler carrier different from other equipment commonly used on a landfill?

A: Versatility and low ground pressure differentiate tracked carriers from standard landfill equipment. Tracked carriers can be equipped with a dump bed or a variety of specialty attachments to tackle multiple tasks throughout the landfill’s life and easily adapt to changing ground conditions to keep operations and revenue flowing. The high utilization opportunities make tracked carriers a valuable asset to landfills and an all-in-one equipment solution.

Q: What considerations are most important when deciding on a rubber tracked crawler carrier?

A: Aftermarket support should be a key determining factor when choosing a crawler carrier to ensure maximum uptime.

Q: How does a tracked carrier work?

A: As a tracked carrier moves, the load of each wheel moves over the track, pushing down and forward that part of the earth or snow underneath it, similarly to a wheeled vehicle but to a lesser extent because the tread helps distribute the load.

Q: What is considered a tracked carrier?

A: Tracked carrier: Continuous track, also called tank tread or caterpillar track, is a system of vehicle propulsion in which a continuous band of treads or track plates is driven by two or more wheels.

Q: What is the difference between a wheeled and tracked carrier?

A: Terrain: Wheeled loaders are best for hard surfaces like paved roads and landscaped areas. Track loaders perform better on rough, uneven terrain. Speed: When it comes to ground speed, wheels have a distinct advantage over tracks.

Q: Are tracked carriers better?

A: The traction is greater if you use tracks instead wheels, but for the best results this depends on the terrain. If you want a less ground pressure, you have to choose the tracks. The tracks have a lower ground pressure than wheels and are more suited to soft surfaces.

Q: How do tracked carrier turn?

A: Tank steering systems allow a tank, or other continuous track vehicle, to turn. Because the tracks cannot be angled relative to the hull (in any operational design), steering must be accomplished by speeding one track up, slowing the other down (or reversing it), or a combination of both.

Q: Are tracked carrier street legal in the US?

A: Would you theoretically be able to drive on a public road in a vehicle that has treads instead of wheels, provided it obeys all other vehicle and road safety laws? If the treads, aka, tracks, like on a tank, were covered in rubber, or some other material that would prevent damaging the road surface, yes.

Q: What is the purpose of a tracked carrier?

A: Tracked carrier spread the ground pressure exerted on the ground by the weight of the vehicle across the whole vehicle length, reducing the ground pressure per surface area and preventing a vehicle from sinking in soft soil.

Q: How much can a mini tracked carrier carry?

A: Specifications. This narrow access machine is only 690mm wide and will fit through a standard doorframe. This mini dumper can carry a maximum of 500kg and will tip into a standard skip.

Q: What is the application of tracked carrier?

A: Tracked carrier are also used to transport materials, such as sand and gravel, that are to be used within construction, not just to be removed from site. This is how dumper trucks have become an essential part of everyday life on construction sites and with the right choice you can streamline operations on your project.

As one of the leading tracked carrier manufacturers in China, we warmly welcome you to buy discount tracked carrier in stock here from our factory. All customized products are with high quality and low price.

tracked carrier, , Agricultural Tracked Transporter