Durable high-quality hole digger

1. High efficiency: The digging machine has strong power, and a pit with a diameter of 50 cm and a depth of 2 meters can be completed in about 1 minute. The efficiency is more than 100 times that of traditional manual digging methods and 5-7 times that of rear-mounted digging equipment;

2. Simple operation: The digging machine realizes the integration of driving and operation, and 1-2 operators can successfully complete the digging and drilling work of various pits;

3. High operation quality: The equipment adopts a front-mounted drill bit design, which is easier to find the drilling point than the rear-mounted type. It uses high-strength drill bits, anti-torsion and anti-tension spiral drill rods, and center positioning. The excavated soil pit is straight and solid, with less soil residue in the pit, and the maximum depth can reach 3.5 meters;

4. Strong adaptability: Since a tractor or excavator is used as the manufacturing platform for the equipment, this type of equipment has strong off-road performance and can adapt well to complex terrains such as hills and mountains. It can operate on most soil types such as loess, clay, gravel containing pebbles, weathered rock and soil, frozen soil, construction backfill garbage, full sand layer, and domestic garbage layer;

5. Wide range of applications: The equipment can be widely used in power and telecommunications projects, municipal projects, greening and tree planting projects, construction projects, solar photovoltaic power generation projects, etc.

1. Strictly match the power indicated on the nameplate to avoid overloading, overspeeding or long-term operation at low load and low speed.

2. Use gasoline and engine oil of regular brands, and filter the oil thoroughly before use. The oil dispenser should be kept clean and the engine oil should be replaced regularly.

3. Check the tightness of the fastening bolts connecting the gasoline engine regularly and tighten them in time.

4. Check the air filter element regularly and replace it if necessary.

5. This machine is an air-cooled gasoline engine. The debris and dirt on the heat sink and fan should be removed in time to ensure the normal cooling of the gasoline engine.

6. The operator should understand the working principle and structure of the gasoline engine, insist on regular maintenance and repair, find faults and eliminate them in time, and avoid the gasoline engine from working with illness.

7. For the high-temperature parts of the muffler, avoid contact during use to avoid scalding.