1. Operators must be trained, pass the examination and obtain a valid special operation operation certificate before they can take up their posts. Before operating, the operator should understand the main performance of the machine, the operating instructions and the maintenance methods.
2. When driving on the road, you must hold a motor vehicle driver's license of the same type as the vehicle issued by the public security department, and consciously abide by the road traffic rules. The scraper and the tiller should be raised, the scraper should not extend to the left, and the speed should not exceed 10KM/H. It is not suitable for operation at night.
3. The rotation of the scraper and the adjustment of the shovel angle and the tilting to the outside of the machine must be carried out when the machine is stopped. The difference in the lifting and lowering of the scraper during operation should not be too large.
4. When encountering hard soil that needs to be loosened by a tooth rake, the teeth should be lowered slowly. It is not advisable to use a tooth rake to loosen hard old roads.
5. When parking on a slope, the front of the vehicle should be facing downhill, and the blade should be gently pressed into the soil.
6. When driving downhill, it is strictly forbidden to shut down the diesel engine and drive in neutral.
7. During operation, no one is allowed to sit in other places except the cab.
8. Pay attention to fire prevention.
9. The fuel used should meet the specified version number and quality standards.
Introduction to the operating procedures of the grader
Send Inquiry