Maintenance and care of hand-held snow Sweepers
- Cleaning: After each use, the snow blower should be cleaned of snow and dirt, including frost and debris on the engine surface and heat sink, as well as ice and slush on the blades or roller brushes.
- Lubrication: Regularly add lubricating oil to the transmission parts and kinematic pairs, and check and lubricate the hinges and bearings of the machine.
- Inspection and tightening: Check all fasteners to ensure that they are not loosened by vibration, including bolts, nuts and clamps, etc., tighten loose parts to ensure the stability and safety of the machine.
- Inspect the engine: Check the amount and quality of the engine oil, and replace the oil if necessary; check the air filter, clean or replace the clogged filter element; check the fuel filter and fuel pipes to ensure that there is no blockage or leakage; check the spark plug or ignition coil and replace it if necessary.
- Cooling system: Check the coolant level and maintain the appropriate amount of coolant; if there is a leak, the cooling system components need to be repaired or replaced.
- Electrical system: Check the electrical wiring to ensure there is no risk of damage or short circuit; check the condition and connection of the battery to ensure that the battery is fully charged and the connection is reliable.
- Regular maintenance: Perform more comprehensive maintenance regularly according to the manufacturer's recommendations, which may include changing the engine oil, replacing the fuel pump, replacing the drive belt, etc..
- Storage: After the snow removal season is over, the snow blower should be cleaned and dried, and then stored in a dry, ventilated place to avoid exposure to extreme temperature and humidity conditions.
