How To Maintain The Oil Pump Of The Crawler Transporter?

The following ten aspects should be paid attention to in the maintenance of the crawler transporter accessories oil pump:
1. Water will corrode the oil pump, so water-containing materials are prohibited from using the oil pump to vacuum.
2. For materials containing a lot of solvents, please remove most of the solvents in the oven before using the oil pump to vacuum.
3. Use the crawler transporter oil pump in the correct order to prevent back suction.
4. After using the vacuum oven, do a good job of cleaning and wipe the glass window of the vacuum oven.
5. Wipe the anti-rust oil on the surface of the crawler transporter accessories oil pump.
6. Remove the anti-rust oil in the inner cavity of the crawler transporter oil pump and add the regular trademark lubricating oil.
7. The anti-rust oil in the hydraulic oil pipeline should also be removed before use. Connect the fuel to the injection pump pipeline and continuously rotate the main wheel shaft of the crawler transporter oil pump until the oil outlet valve sprays clean hydraulic oil to stop.
8. Reasonable fuel selection.
9. Use hydraulic oil with appropriate grade.
10. The hydraulic oil used must be clean and must not contain impurities and moisture.