Check the equipment: Make sure that all parts of the branch crusher are intact, especially the blades, bearings and other wearing parts. Check whether the power cord and cable are intact, whether the grounding is good, and whether the lubrication system is sufficient.
Familiar with the operating procedures: Operators must be trained and familiar with the structure, performance and operation methods of the equipment. Read the equipment's instruction manual to understand the equipment's performance parameters, operating procedures and safety requirements.
Clean up the work area: Clean up the debris and obstacles in the work area to ensure a safe operating environment. Operation steps
Start the motor: Observe whether the crusher is operating normally. If there is any abnormality, stop the machine immediately for inspection.
Feed in materials: Be careful not to feed too much to avoid overloading the equipment. During the feeding process, closely observe the operation of the crusher. If any abnormality is found, stop the machine immediately for inspection.
Discharging: Ensure that the discharge port is unobstructed and that the material accumulation is not too much to avoid affecting the discharge effect.
