Safety protection: When using a walk-behind trencher, you must wear a helmet and gloves to prevent accidental injuries. At the same time, pay attention to the balance and stability of the machine to avoid tilting or breaking down.
Clutch operation: Before starting the engine, the clutch lever should be placed in the disengaged position, and then adjusted to the engaged position after entering the field. When turning at the corner of the field, you should slow down in advance, put the clutch lever in the disengaged position, and then pinch the tractor steering rod to turn.
Inspection and maintenance: Before working in the field, the walk-behind tractor and trencher should be fully inspected and maintained to ensure that the machine is in good technical condition. The inspection content includes the engine, clutch, transmission, etc.
Lubrication and maintenance: The walk-behind trencher needs to be lubricated regularly, select the appropriate lubricant and operate according to the instructions. At the same time, the machine surface and the tool should be cleaned in time, and the wearing parts such as the tool and chain should be replaced to keep the machine running normally and extend its service life.
Operating environment: During operation, it is recommended to wear protective glasses to prevent mud splashing and injuring the eyes. When moving the machine, the rotational power of the trencher must be cut off, the clutch lever must be in the disengaged position, and the driving speed must be reduced.
Soil moisture: The walk-behind trencher is suitable for soils of different moisture levels, but the best effect is when the soil moisture is moderate. Too wet or too dry soil will affect the performance and life of the machine.
