How to operate a crawler rotary tiller
Safety preparation
Before operating a crawler rotary tiller, first ensure the safety of the operator. The operator should wear appropriate work clothes, including protective shoes, gloves, goggles, etc. to protect themselves from accidental injuries. At the same time, check whether the machine is in good working condition, such as whether the blade is installed correctly and whether the machine has any damage. If any problems are found, they should be repaired and replaced in time.
Preliminary preparation
1. Stop the tractor and hold the handbrake tightly to ensure that the machine will not move during operation.
2. Turn on the blade transmission switch to ensure that the blade can start to rotate.
3. Adjust the tractor's gear to the appropriate position to ensure that the speed of the rotating blade matches the travel speed. Generally speaking, the deeper the rotary tillage depth, the greater the power required, so choose the appropriate gear to provide sufficient power.
Adjusting the depth
Use the depth control lever or manual device to adjust the working depth of the rotary tiller to the desired position. When adjusting the depth, choose according to different soil conditions and crop types. For example, in harder soil, it may be necessary to increase the rotary tillage depth to break up the soil structure; while in softer soil, the rotary tillage depth can be appropriately reduced to avoid over-tillage.
Starting the operation
1. Start the tractor and move forward slowly while ensuring that the blade rotates on the ground. At the beginning, do not rush to accelerate, and gradually increase the travel speed to avoid excessive load on the machine.
2. During the operation, keep an arm's length apart to ensure the stability of the operation. If the operation is too close or too far, it may affect the tillage effect.
3. According to actual needs, you can choose to increase or decrease the speed of the rotating blade. Generally speaking, a higher blade speed is required in harder soil to break up the soil; while in softer soil, the blade speed can be reduced to save energy.
